Sandblasting Cabinet ọgbụgba ọkụ ite Ma Sandblaster Parts
  • Piston electric air pump machine Air compressor HST-3.2/7

    Igwe pistin eletriki ikuku ikuku ikuku HST-3.2 / 7

     A na-eji nrụgide ikuku nke ụlọ ọrụ na-eme mkpọchi ikuku, ngwá ọrụ pneumatic, onu oriri taya

    ịfụ usoro, ịgba agba, ájá ọgbụgba ọkụ na fluidic element.Powerful ụdị nnukwu isi imewe, na-eji ezi

    ezu ihe onwunwe. Ike imewe maka isi mmiri, akụkụ nke handpiece

    wasatọ karịa ụlọ ọrụ ndị ọzọ, nchekwa dị elu, na obere ọsọ, ọkachasị maka nnukwu ọrụ

    ogologo oge na-aga n'ihu ọrụ, karịsịa elu pụrụ ịdabere na ogologo ọrụ ndụ.

    Karịsịa ikuku jụrụ imewe na ikuku eruba imewe, ala iyuzucha okpomọkụ, adịghị mfe carbon deposition na elu arụmọrụ.

     

    FNri

    Iji valvụ emechiri emechi emechibidoro nchekwa arụmọrụ.
    Ngwaahịa dị na Ogwe 30 & 40 iji kwado ma nkedo PET nke mgbidi dị iche iche.
    Ọsọ na-agbanwe agbanwe na-eme ka arụ ọrụ nke karama PET dịgidere.
    Ngwaahịa kacha mma maka iji ya rụọ ọrụ igwe eji agbapụta PET.

  • Shot blasting Machine Rubber Belt , Shot Blaster Parts

    Gbara ọgbụgba ọkụ Machine Rubber echebe, Gbara Blaster Parts

    Main Nka na ụzụ 
    Ekweghị (Shore A) 63 Celsius ± 3 ° C
    Ike ọdụdọ 20.0MPA
    Mgbatị na ezumike nke 500%
    Mgbanwe nke 52%
    Yiri 0.24CM3
    Anya mmiri na-agba 68.6KN / M
    Ndị na-eme agadi nke (70 Celsius C / 72H) 0.91
    Nrapado 48.2-31.36N / CM

    Nwee ya na Track Shot ọgbụgba ọkụ Machinery ma ọ bụ Track Aja ọgbụgba ọkụ igwe 

  • Hook Type Head Rail Shot Blasting Floor Cleaning Machine Q376 Q378 Q3710 Q3720

    Nko Type Head Rail gbara ọgbụgba ọkụ Ft Nhicha Machine Q376 Q378 Q3710 Q3720

    Q378 nko ụdị Shot ọgbụgba ọkụ Machinery
    1.The Ọdịdị nke shot ọgbụgba ọkụ ụlọ na ndokwa nke shot ọgbụgba ọkụ igwe na-niile na-adọta

    site na kọmpụta enyere aka na kọmputa (CAD), nke nwere ezi uche.
    2.The itinye n'ọrụ ọnụego nke projectiles na-mma, na ihicha mmetụta na-hụrụ

    na abrasion ka ụlọ ahụ na-echebe efere na-ebelata.
    3.The cantilever centrifugal gbawara wheel tobaim (Q034) na

    nnukwu ọgbụgba ọkụ ibu na elu ọgbụgba ọkụ ọsọ nwere ike
    budata melite nhicha arụmọrụ ma nweta afọ ojuju nhicha mma.

  • Crawler Belt Shot Blasting Machine, Crawler sand blaster Q324 Q326 Q3210

    Crawler Belt gbara ọgbụgba ọkụ Machine, Crawler ájá blaster Q324 Q326 Q3210

    Ngwa:

    ♦ Ferrous na-abụghị ferrous oge ọgbụgba

    At Okpomọkụ mesoo mgbaghara

    Obere ụgbọala

    Die castings na ọtụtụ ndị ọzọ

    ♦ Ala uru akụkụ impingements n'etiti akụkụ abụghị nsogbu

    Mgbe mmepụta chọrọ kpebie ogbe nhazi

    Cast Nkedo nke dị ntakịrị na nke ọkara, akwa akwa na akụkụ ndị a na-ekpo ọkụ

    Removal Mwepụ aja ma ọ bụ nhicha akụkụ

  • Hook type shot blasting machine

    Nko ụdị ogbugba ọgbụgba ọkụ igwe

    Nkọwa ngwaahịa

    Frequency inverter maka na-apụta ebu, gbawara wheel, abrasive imegharị ihe maka iji usoro, digital akara obubọk,

    nhọrọ ahaziri akpaka loading na ebutu usoro, ájá mkpoko.

    Igwe a bụ maka nhicha elu ma ọ bụ ọgwụgwọ siri ike nke obere ihe nkedo, na-akpụ akụkụ na ụlọ ọrụ nke foundry, ụlọ, chemical,

    moto, akụrụngwa akụrụngwa wdg. Ọ bụ ihe pụrụ iche maka ihicha elu na ike ọgbụgba na ụdị dị iche iche

    obere mmepụta oge ọgbụgba, ibe ya bụrụ akụkụ na nchara akụkụ maka ikpochapụ obere viscous ájá

    isi ájá na akpụkpọ oxide. Ọ dịkwa mma maka nhicha elu na iwusi ike na akụkụ ọgwụgwọ ọkụ, ọkachasị maka nhicha obere, akụkụ mgbidi dị nro nke na-ekwesịghị ekwesị maka mmetụta.

  • Shot Blasting Machine Parts Points Pill /Blades/Abrasive

    Gbara ọgbụgba ọkụ Machine Parts Points / pupụtara / abrasive

    Points ogwu Shot ọgbụgba ọkụ igwe bụ ọrụ nke wheel abrasive dị ka ụfọdụ arịrịọ ikike kenyere na agụba

    na-egosi mkpụrụ ọgwụ ndị mepere emepe mgbe akwa akwa na abrasive ga-ada na njedebe nke agụba, agụba na-adịghị mma,

    abrasive divergent eruba agaghị iwu, ka oge na-elele ihe dị ka chọrọ nke nkọwapụta Erere wheel eyi na oge maka eyi oké njọ maru “.

     

    Directional set nke oghere ọnọdụ chọpụta Erere abrasive kewara akwukwo ọnọdụ, gbanwee nghazi na udi nke ọnụ udi na-emetụta ndị divergence nke abrasive na nke nke na-ekpo ọkụ tụrụ

    agbasa abrasive abrasive na-etinye uche n’elu otu mpaghara, kpatara site nkesa abrasive na agụba

    mgbanwe nghazi nghazi nke onodu nwere ike di ka ihe kwesiri ekwesiri iyi na akwa na imeghari mmezi. nchoputa nke tufuru ogbugba ogbugba igwe na-aru oru n'okpuru oru nke ihe a.

     

    N'azụ isi agụba na abrasive kpọmkwem kọntaktị, ogo ya nwere njikọ chiri anya iji tụfuo arụmọrụ isi.

    eyi eguzogide nke agụba ozugbo ekpebie ọrụ ndụ nke agụba na shot ọgbụgba ọkụ igwe na-agba ọsọ na-eri

    otutu isi agụba bụ iji elu eyi-eguzogide ihe onwunwe, na-eyi ndị na-eguzogide nke agụba nke metụtara na ihe onwunwe nke agụba

    nwere njikọ chiri anya na ọnọdụ ọrụ nke igwe ọgbụgba ọkụ.

  • Shot blasting impeller

    Shot ọgbụgba ọkụ impeller

    Shot ọgbụgba ọkụ impeller

    Direct Shot bụ ihe ọhụrụ, na-arụ ọrụ nke ọma, na-enwe ọmarịcha ọdịdị, kọmpat, na mkpọtụ dị ala

    nchekwa nchekwa na atụmatụ nchekwa gburugburu ebe obibi

    MOdel Dayameta Ọsọ Nnukwu ogbugba gbawara agbawa Ike
    MMA044 380mm 2940r / min 120kg 7.5KW
    NJ033 400mm 2450r / nkeji 180kg 11KW
    Q034B 380mm 2940r / min 250kg 15KW