Sandblasting Cabinet ọgbụgba ọkụ ite Ma Sandblaster Parts
  • Sandblaster Parts Nylon quick couplings for sandblasting hose

    Sandblaster Parts naịlọn ngwa ngwa njikọta maka sandblasting sooks

    Quick naịlọn couplings maka sandblast sooks sandblast nozulu njide maka sandblasting igwe

    Enwere 4 dị iche iche dị ka ndị na-esonụ:

    Q-IM-NY iji kwado OD34mm sooks 

    Q-1-NY iji kwado OD39mm sooks 

    Q-2-NY dabara OD50mm sooks 

    Q-3-NY iji kwado OD55mm sooks 

    SB-NY nwere eriri dị mma 45mm 

    Mgbe ọgbụgba ọkụ ahụ ezughị ezu, anyị nwere ike ijikọ akpa abụọ ahụ na njikọta ngwa ngwa anyị.

    Ọrụ usoro:
    1. tubes abụọ nke otu ogologo: Wepụ nkwonkwo abụọ nke otu nha, hazie bayoneti

    pịa ma bugharia iji jide, wee jikọọ ọkpọ sandblasting na nsọtụ abụọ.
    2. Akpa abụọ nke ogologo dị iche iche: Wepụ nkwonkwo abụọ nke nha kwekọrọ, dozie bayoneti

    pịa ya ka ọ gbanwee, wee jikọọ ọkpọ sandblasting na nsọtụ abụọ.
    3. Ngwunye tankị na-ekpo ọkụ: Jikọta mkpụmkpụ mkpụmkpụ anyị ozugbo na ala nke igwe na-ekpo ọkụ.
    Uru: Mfe ọrụ, njikọ ọsọ ọsọ na sandblasting tube, mma arụmọrụ arụmọrụ obere enweghị isi nsogbu, mma fixability.
    Oge: Kwesịrị ekwesị maka ịmepụta ụgbọ mmiri, nnukwu arụ ọrụ na-arụ ọrụ, nchara ígwè, nnukwu ihe nkedo, nnukwu ebu, ihe nkedo na-arụ ọrụ valves.

  • Whole set sand blasting helmet with air hose,air breathing filter,temperature regulator

    Dum set ájá ọgbụgba ọkụ okpu agha na ikuku sooks, ikuku na-eku ume iyo, okpomọkụ regulator

    Elu àgwà ABS Sandblast echebe ya okpu agha na 1m ndepụta ikuku sooks

     

    Ọkara ogo Nrụgide nke ọrụ Wight N'ozuzu ya
     (The abịakọrọ ikuku)        4-8kg  0.8kg          38mm * 210mm

    Okpu agha a na-acha uhie uhie na-eji ike nke ihe ABS, otu were, kwekọrọ n'ụkpụrụ nchekwa mba,

    hụ na agbajighị agbaji; Oké insipidity, e nwere a-acha ọbara ọbara na-acha odo odo ntụpọ, agba bụ ọmarịcha anya,

    ghara ịda mbà ma na-achagharị anya; Site na ndu uzo uzo, ka ikuku na-ekesa nkesa gburugburu, isi ihe na ihu nke eserese foto,

    wepụ ikuku na-eku ume, mee ka ọ pụta ìhè karịa akara nke anya, iji mee ka ọhụhụ ya doo anya, zere ikuku ikuku n'isi, na-eme ka ahụ erughị ala;

    Isi na ọkpọkọ silica gas na-adịghị egbu egbu, nkwụsi ike na-ehulata; N'ihu ihu, jiri mkpịsị mechie, nha nke ihapu mbibi adaba,

    gbapụ uwe nwere ike ozugbo tụgharịa nnọchi oghere window; Olu a kwadebere na-agbanwe akara, akara nke ọma, shawls na ikechi,

    mfe iyi. Naanị otu kilogram nke ịdị arọ zuru oke nke ngwaahịa zuru ezu;

    E kewara ngwaahịa a n'ime: okpu agha, okpu agha ọbụlagodi uwe, oke okpu agha, nwekwara ike ịhazi ya.

    Ngwaahịa a nwere ogologo oge, nchekwa, nchekwa gburugburu ebe obibi, nke dị mma, nke dị mma, arụmọrụ a kara akara dị mma ichere maka njirimara.

  • Safety Sandblast Helmet Sand Blast Hood Protector Mask for painting

    Safety Sandblast Helmet Sand Blast Hood echebe nkpuchi maka eserese

    Atụmatụ:

    Aja ọgbụgba ọkụ echebe Face Nkpuchi mkpuchi okpu Anti ustjá Wind Sandblasting okpu agha
    Ezubere iji chebe ihu gị pụọ na nsogbu mbibi
    Elu dị elu ma na-eku ume, dị mma iji eyi
    Ezigbo maka egweri, ikpochapu mmiri, mmiri na-agba mmiri, wdg
    Vent design: Gbaa mbọ hụ na ọ naghị emetụta iku ume n’oge ogologo ọrụ.
    Na-agbanwe agbanwe imewe eji n'ime .Effective gbochie ájá na mma ájá ịbanye.

  • Hand Held Sand Blasting Spray Gun Blast Abrasive Media, Soda, Bead, Walnut, Aluminum Oxide – Pneumatic

    Aka jidere Sand ọgbụgba ọkụ raygba Gun Blast Abrasive Media, Soda, Bead, Walnut, Aluminium oxide - Pneumatic

    • Sandblaster】 Ahụ aluminom dị mfe ma dị mfe, na ụdị ejiri aka dị mfe iji.
    • Enwere ike idozi aja aja na aja na-ekesa aja aja iji chekwaa ihe.
    • 【Easy Jiri】 raara nye nile di iche iche nke na-egbuke egbuke na obere metal nkuku, ịgba sere, raw n'ọnụ,
    • nchara nchara nkọwa; nnukwu ikike ihe ite maka ụdị nile nke ájá: nwa corundum, sịlịkọn carbide, iko chaplet, wdg
    • LASTING LASTING High Performance】 - Inogide aja blaster na blasts elu na-agba media ahụ
    • nke na-ewepu agba ngwa ngwa, nchara, corrosion na akpịrịkpa. Jiri blaster nwere ọtụtụ gbawara media ụdị dị ka ájá
    • aluminom oxide abrasives, chaplet, soda ma ọ bụ ezigbo ukpa shells dabere na gị oru ngo ngwa mkpa.
    • T【MARA】 : Na usoro iji ngwaahịa a, ị ga-eyi uwe aka na nchedo anya yana akụrụngwa ndị ọzọ maka ịrụ ọrụ ọfụma.
    • Mgbe ị na-eji egbe, atụkwasịla egbe na mmadụ na anụmanụ.
    • Professional mgbe-sales ọrụ】 Anyị mgbe niile na-eguzosi ike n'azụ ọ bụla zuo nke gị. Y’oburu n’inwe ihe obula, afọ adighi afọ ojuju
    • biko mee ka anyị mara na ndị ọrụ ndị ahịa anyị ga - enyere gị aka ịlaghachi ma ọ bụ ịkwụghachi.
  • ABS Blasting painting dust protective helmet Sandblast hood

    ABS ọgbụgba ọkụ ájá echebe okpu agha Sandblast hundu

    Atụmatụ:

    1. Nke a okpu agha mere nke PC + ABS, na ezi mkpakọ na-eguzogide ma na reat anya, andcanprovide asecure gburugburu ebe obibi maka rụọ

    2.The kariyalensadopt doublelayer nkeprotection.Inner oyi akwa bụ PVClens, ná mpụta oyi akwa bụ toughened iko,

    nwere ike imeziwanye nguzogide abrasionhelhel na inye uzo sara mbara maka ndi oru.

    3.The helmethave airflow ndu uzo, n'ụzọ zuru ezu adjustair inletstrength.And onwem na mgbochi fogspray,

    ndị na-enyere aka rụọ ọrụ nke ọma mepee ma doo anya na ọnọdụ okpomọkụ n'ime akwara.

    4.Thishelmetisexportfoundry ngwaahịa, izute nationalsafety oru ụkpụrụ, nwere ogologo ọrụ ndụ na ezi na-echebe mmetụta.

    5 .Ọ nwekwara ike na-anọpụ iche mbukota na OEMproduction dị ka ndị ahịa 'mkpa

  • High pressure sand blasting hose

    High mgbali aja ọgbụgba ọkụ sooks

    Tube: black antistatic abrasion eguzogide okike roba compound
    Mkwado: site naịlọn ụdọ ply
    Ihe mkpuchi: abrasion ojii na roba antistatic.
    Ngwa: n'ihi na ulo oru ihicha, ọnwụ, polishing, mgbatị na-eje ozi ọrụ.
    Okpomọkụ:
    -40 Celsius C + 80 Celsius
    Mbukota:trans. Ihe nkiri PVC

  • Air Sandblaster Gun Blasting Gun for Sandblasting Cabinet for 990L/1200L Sand Blasting Cabinet Sandblaster Parts

    Ikuku Sandblaster Gun ọgbụgba ọkụ maka Sandblasting Cabinet maka 990L / 1200L Sand B ọgbụgba Cabinet Sandblaster Parts

    • Aja ọgbụgba ọkụ Cabinet Sandblaster egbe
    • Kwesịrị ekwesị maka ọtụtụ mgbasa ozi gbawara agbawa - iko iko, seramiiki, aluminum oxide, na ụfọdụ nha nke nchara nchara na ogbugba. Họrọ mgbasa ozi gbawara kwesịrị ekwesị maka ngwa gị.
    • Igwe arụmọrụ dị elu na-enye nkasi obi maka onye ọrụ, ma na-enye ohere ịchịkwa usoro ọgbụgba ọkụ.
    • Nọgidere na-eme ka ikuku ụgbọelu na ikuku gbawara agbaji dabara nke ọma iji bulie arụmọrụ oke ma belata egbe egbe.
    • Ala pistol-adịgide imewe ebelata ọrụ ike ọgwụgwụ na enwekwu arụpụtaghị n'oge agbatị ọgbụgba ọkụ.
  • Cylindrical Ceramic Blasting Nozzles

    Cylindrical Seramiiki ọgbụgba ọkụ Nozzles

    Banyere nke a Efere nozzles

    • Inogide seramiiki sandblast nozulu maka ogwu nke ọkara ahụ maka ngwangwa mwepụ nke agba, nchara, corrosion na ọnụ ọgụgụ.
    • Tumadi eji maka miri nhazi dị ka sandblasting na osise nke iko. Nkedo na nhazi nke marble na nkume ndi ozo.
    • Adabara sandblasting na derusting n'elu nke ulo oru ígwè akụkụ na oge ọgbụgba dị ka ígwè na Metallurgical nkedo.
    • Nwere ike iji ọtụtụ sandblasted media dị ka iko beads, aja aja corundum, garnet, soda mmiri, ukpa shei.
    • Mbukota nkọwapụta: seramiiki nozulu * 10.
  • Protective clothing Work clothing Sandblasting protective clothing

    Uwe mkpuchi ọrụ Uwe akwa mkpuchi akwa mkpuchi

    Siamese sandblasting uwe: Ogologo: 180cm,

    igkpụrụ nchebe dị egwu abụghị naanị na-echebe ndị ọrụ bara uru,

    ha na-abawanye arụmọrụ, ma na-ejigide aha ọrụ siri ike nke ụlọ ọrụ dị ka ndị na-eweta ngwaahịa na ndị were ha n'ọrụ.

    nwalere iji ihe omumu nchebe di iche iche .Ọ bụ usoro ahụ na-adịghị agbanwe agbanwe nke na-egosi

    Nzube na ụkpụrụ dị elu na ụkpụrụ omume ha setịpụrụ n'ihe ọ bụla ha na-eme.N'ihi na ọrụ na ndụ na-adabere na ngwaahịa ha;

  • sell well double venturi boron sandblast nozzle for you

    re nke ọma okpukpu abụọ venturi boron sandblast nozulu maka gị

    Ọdịdị: carbon ígwè shei mgbe ájá ọgbụgba ọkụ na plating, aluminum shei mgbe ájá ọgbụgba ọkụ.

  • High quality Venturi Boron Carbide Nozzle High Pressure Sandblasting Nozzle

    Elu àgwà Venturi Boron Carbide Nozulu High Pressure Sandblasting Nozulu

     akwa ekweghị ekwe ezi wear-eguzogide onwunwe corrosion eguzogide elu okpomọkụ na-eguzogide njupụta: ≥2.48g / cm3 micro ekweghị ekwe ≥3500kgf / mm2 ekwe ike: ≥400Mpa agbaze uche: 2450 ℃ Na-arụ ọrụ okpomọkụ: nkịtị okpomọkụ arụ ọrụ mgbali: 5-100P Ogologo: 150- 220mm Bore n'obosara: 6/8 / 10mm
  • 1 1/4” Venturi boron carbide sandblasting nozzle

    1 1/4 ”Venturi boron carbide ihe eji agba aja aja

    Boron carbide nozzles na-abụkarị uwe tungsten carbide nozzles site na ise ruo ugboro iri na silicon carbide site na abụọ ruo ugboro atọ.

    Boron carbide nozzles na-atụ aro ka ojiji na abrasives dị ka aluminum oxide na ike ike ịnweta aggregates.

1234 Osote> >> Peeji 1/4